Buffer TanksToll Free: 866-204-5229     Fax: 918-317-0407

Home Products Pricing Helpful Hints Did You Know About Us What's New

TDV/TSV Valves

Suction Diffusers

Tanks

   ASME Bladder

   ASME Plain Steel

   Chemical Feeder

   Buffer Tanks

   Hydraulic Separators

   Flash

   Special

   Tank Accessories

   Hot Water Storage

Air Separators

   Tangential

   In-Line

   Sediment Removal

   Air & Dirt

   Air Scoops

Heat Exchangers

Strainers

Valves

   Automated

    Check

   Butterfly

   Balancing

   Air Release

   Relief

   Water Reducing

   Dual Control

   Ball

Flex Pump Connectors

Buffer Tanks

Chilled Water Buffer Tanks

Designed for chilled water systems with insufficient water volume capacity, in relation to the chiller capacity. Relatively low water volume systems require additional “buffer” capacity for the system to eliminate problems such as excessive chiller cycling, poor temperature control, and erratic system operation. The properly sized American Wheatley CBT tank adds the necessary volume to “buffer” the system.

 

Carbon Steel Construction

Exterior Primer Painted

Max Design Temp: 450F

Max Design Press: 125 PSI

Hot Water Buffer Tanks

American Wheatley HS Series Hot water buffer tanks are designed to operate with modern high efficiency low-mass modular boiler systems. The American Wheatley hot water buffer tank ensures minimal ΔT and provides the necessary thermal storage to prevent short cycling that could occur during low load conditions.

 

Prevents flow in one circuit from interfering with flow from another circuit

Eliminates the need for a primary loop circulating pump, air separator, and strainer, thereby reducing initial cost as well as operating cost

Eliminates complicated piping, reduces labor and piping costs

Sized for no more than 4 fps, low velocity in the vessel results in low pressure drops

Correctly installed hydraulic separation allows the use of multiple circulators to operate independently without interfering with each other

Ideal for multiple load systems

American Wheatley manufactures ASME hydraulic separators in standard sizes 40 gallon through 400 gallon with connections, 2" through 16"

Custom sizes readily available

 

Catalog Sheets
Chilled Water Buffer Tank
Chilled Water Buffer Tank Installation & Operation Instructions
Chilled Water Buffer Tank Sizing Instructions
HS Series Hot Water Buffer Tank
Hot Water Buffer Tank Installation & Operation Instructions
HS Series Hydraulic Separators/Buffer Tanks
HSC Series Coalescing Type Hydraulic Separators
Pricing
Buffer Tank Prices

Global Flow Products LLC
1005 E. Houston
Broken Arrow, OK 74012 

Toll Free: 866-204-5229
Phone: 918-317-0401
Fax: 918-317-0407

sales@globalflowproducts.com

 

Last Modified : 11/04/17 09:56 AM

 

Copyright 2009 Global Flow Products LLC

 

site stats